 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC-DC 10-30 Watts SWX Series * * * * * * Low Profile (8 mm max) Wide Operating Temperature Remote On/Off Parallel Operation High Reliability International Safety Approvals xppower.com Specification Input Input Voltage Range Start Up Voltage Hysteresis Voltage * 18-36 VDC (for SWX15 & SWX30) 36-76 VDC * 16-18 VDC for 24 Vnom 32-36 VDC for 48 Vnom * 1 VDC min for 24 Vnom 2 VDC min for 48 Vnom General Efficiency Isolation Voltage Alarms * See table * Input to Output 1500 VDC * If over or under voltage protection is activated the ALM pin becomes the same level as the -Vin pin Environmental Output Output Voltage Minimum Load Start Up Delay Initial Set Accuracy Total Regulation Output Ripple Ripple & Noise * * * * * * * See table No minimum load required 200 ms max (Vnom, Io 100%) Vnom +2/-1% measured at Vnom in 100% load and +25 C +5/-3% 25 mV max pk-pk, 1.2 to 5 V models 120 mV max 12 & 15 V models 50 mV pk-pk, 1.2 to 5 V models 150 mV max 12 & 15 V models 120-140% of Vnom recycle input to reset Works 200 ms after an overload when the output voltage drops to 90% of rating Standard It is possible to parallel a maximum of 10 units Operating Temperature * -40 C to +85 C (for derating curves - contact sales for application note) Storage Temperature * -40 C to +100 C Operating Humidity * 20-90%, RH non-condensing Shock * 20 G, 11 ms once each X, Y & Z axis Vibration * 5 G 10-55 Hz 3 min period, 60 min each along X, Y & Z axis EMC & Safety Emissions * EN55022, level A conducted external filter required EN55022, level A radiated (contact sales for application note) * EN61000-4-2, level 4 * EN61000-4-3, level 3 * EN61000-4-4, level 4 * EN61000-4-5, level 3 * EN60950, UL60950, C-UL Overvoltage Protection * Low Voltage Protection * Remote On/Off Parallel Operation * * ESD Immunity Radiated Immunity EFT/Burst Surge Safety Approvals DC-DC Models and Ratings Input Voltage Output Power 4.20 W 5.25 W 5.40 W 6.00 W 36-72 VDC 7.50 W 9.90 W 10.00 W 10.80 W 10.50 W 7.80 W 8.10 W 11.25 W 18-36 VDC 14.85 W 15.00 W 15.00 W 15.00 W 6.24 W 7.80 W 8.10 W 9.00 W 36-76 VDC 11.25 W 14.85 W 15.00 W 15.00 W 15.00 W 13.50 W 14.40 W 36-76 VDC 17.50 W 19.80 W 20.00 W 12.50 W 15.60 W 16.20 W 18-36 VDC 22.50 W 29.70 W 30.00 W 30.00 W 30.00 W 12.50 W 15.60 W 16.20 W 18.00 W 36-76 VDC 22.50 W 29.70 W 30.00 W 30.00 W 30.00 W 30.00 W Notes 1. Measured at Vnom input, rated load and +25 C. 2. For SWX10 and SWX15 models, a 1 A fast blow fuse and 10 F capacitor are recommended across the input pins. For SWX30 models, a 2 A fast blow fuse and 20 F capacitor are recommended across the input pins. 3. For surface mount package add suffix `-SMB' to model number. 4. Contact sales for full application notes or visit www.xppower.com. SWX Output Voltage 1.2 V 1.5 V 1.8 V 2.0 V 2.5 V 3.3 V 5.0 V 12.0 V 15.0 V 1.5 V 1.8 V 2.5 V 3.3 V 5.0 V 12.0 V 15.0 V 1.2 V 1.5 V 1.8 V 2.0 V 2.5 V 3.3 V 5.0 V 12.0 V 15.0 V 1.5 V 1.8 V 2.5 V 3.3 V 5.0 V 1.2 V 1.5 V 1.8 V 2.5 V 3.3 V 5.0 V 12.0 V 15.0 V 1.2 V 1.5 V 1.8 V 2.0 V 2.5 V 3.3 V 5.0 V 10.0 V 12.0 V 15.0 V Output Current 3.50 A 3.50 A 3.00 A 3.00 A 3.00 A 3.00 A 2.00 A 0.90 A 0.70 A 5.20 A 4.50 A 4.50 A 4.50 A 3.00 A 1.25 A 1.00 A 5.20 A 5.20 A 4.50 A 4.50 A 4.50 A 4.50 A 3.00 A 1.25 A 1.00 A 9.00 A 8.00 A 7.00 A 6.00 A 4.00 A 10.40 A 10.40 A 9.00 A 9.00 A 9.00 A 6.00 A 2.50 A 2.00 A 10.40 A 10.40 A 9.00 A 9.00 A 9.00 A 9.00 A 6.00 A 3.00 A 2.50 A 2.00 A Efficiency(1) 80% 82% 84% 85% 86% 88% 89% 88% 88% 82% 85% 87% 89% 90% 89% 89% 80% 82% 85% 86% 87% 89% 90% 89% 89% 86% 85% 88% 90% 90% 81% 83% 86% 88% 90% 90% 89% 89% 81% 83% 86% 87% 88% 90% 90% 90% 89% 89% Model Number(3) SWX1048S1V2 SWX1048S1V5 SWX1048S1V8 SWX1048S2V0 SWX1048S2V5 SWX1048S3V3 SWX1048S5V0 SWX1048S12 SWX1048S15 SWX1524S1V5 SWX1524S1V8 SWX1524S2V5 SWX1524S3V3 SWX1524S5V0 SWX1524S12 SWX1524S15 SWX1548S1V2 SWX1548S1V5 SWX1548S1V8 SWX1548S2V0 SWX1548S2V5 SWX1548S3V3 SWX1548S5V0 SWX1548S12 SWX1548S15 SWX2048S1V5 SWX2048S1V8 SWX2048S2V5 SWX2048S3V3 SWX2048S5V0 SWX3024S1V2 SWX3024S1V5 SWX3024S1V8 SWX3024S2V5 SWX3024S3V3 SWX3024S5V0 SWX3024S12 SWX3024S15 SWX3048S1V2 SWX3048S1V5 SWX3048S1V8 SWX3048S2V0 SWX3048S2V5 SWX3048S3V3 SWX3048S5V0 SWX3048S10 SWX3048S12 SWX3048S15 DC-DC Mechanical Details 38.7 SWX NC 16 -Vin 17 10, 15 & 20 Watt Model - Through Hole NC +Vout +Vout NC +Vout +Vout -Vout +Vout -Vout +Vout -Vout 0.6 0.1 -Vout NC 0.6 0.1 NC 7 38.7 P=2.54 0.2 X 5 0.2 X 5 P=2.54 1 0.2 X 9 1 0.2 2.54 0.2 17 -Vin NC +Vin 16 -Vin +Vin -Vin +Vin +Vin PO 27.2 P=2.54 0.2 X 9 P=2.54 27.2 2.54 10.16 RC 8 2.17 10.16 2.54 0.2 2.54 0.2 ALM PO NC RC ALM NC 3.5 7 5 max 8 3.5 5 max 2.17 Dimensions in mm Tolerance : 0.5 Weight : 12g Dimensions in mm Tolerance : 0.5 Weight : 12g 37.6 0.6 37.6 0.6 10, 15 & 20 Watt Model - Surface Mount NC 38.7 38.7 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 17 Pin Name NC +Vout +Vout +Vout -Vout -Vout NC NC ALM RC PO NC +Vin +Vin -Vin -Vin NC NC Function Position for SM Adhesive +DC Output +DC Output +DC Output -DC Output -DC Output Position for SM Adhesive Position for SM Adhesive Alarm Remote On/Off Start In/Out +DC Input +DC Input -DC Input -DC Input Position for SM Adhesive P=2.54 5 P=2.54 0.2 X0.2 X 5 2.17 2.17 10.16 10.16 2.54 0.2 2.54 P=2.54 0.2 P=2.54 0.2 X 9 X 9 27.2 27.2 +Vout NC +Vout +Vout +Vout +Vout -Vout +Vout -Vout -Vout -Vout NC NC 1 1 17 16 -Vin NC -Vin 16 -Vin +Vin -Vin +Vin +Vin +Vin NC 0.2 7 8 7 2.54 0.2 0.2 2.54 8 PO NC RC PO ALM RC NC ALM NC 5 max 5 max Terminal PCB Terminal PCB 0-10 0-10 0.6 0.6 1.3 0.3 1.3 0.3 39.9 39.9 0.6 Coplanarity within 0.1 Coplanarity within 0.1 Dimensions in mm Tolerance : 0.5 Dimensions Weight : 12gin mm Tolerance : 0.5 Weight : 12g 0.6 DC-DC Mechanical Details 38.7 SWX NC 16 -Vin 17 30 Watt Model - Through Hole NC +Vout +Vout NC +Vout +Vout -Vout +Vout -Vout +Vout -Vout 0.6 0.1 -Vout NC 0.6 0.1 NC 7 38.7 P=2.54 0.2 X 5 0.2 X 5 P=2.54 1 0.2 X 9 1 0.2 2.54 0.2 17 -Vin NC +Vin 16 -Vin +Vin -Vin +Vin +Vin PO 3.12 P=2.54 0.2 X 9 P=2.54 3.12 2.54 10.16 RC 8 4.17 10.16 2.54 0.2 2.54 0.2 ALM PO NC RC ALM NC 3.5 7 8 max 8 3.5 8 max 4.17 Dimensions in mm Tolerance : 0.5 Weight : 20g Dimensions in mm Tolerance : 0.5 Weight : 20g 37.6 0.6 37.6 0.6 30 Watt Model - Surface Mount 38.7 38.7 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Pin Name NC +Vout +Vout +Vout -Vout -Vout NC NC ALM RC PO NC +Vin +Vin -Vin -Vin NC Function Position for SM Adhesive +DC Output +DC Output +DC Output -DC Output -DC Output Position for SM Adhesive Position for SM Adhesive Alarm Remote On/Off Start In/Out +DC Input +DC Input -DC Input -DC Input Position for SM Adhesive P=2.54 0.2 5 P=2.54 0.2 A A 5 P=2.54 0.2 9 P=2.54 0.2 A A 9 31.2 31.2 NC NC +Vout +Vout +Vout +Vout +Vout +Vout -Vout -Vout -Vout -Vout 2.54 0.2 2.54 0.2 NC NC -Vin -Vin -Vin -Vin +Vin +Vin +Vin +Vin NC NC PO PO RC RC ALM ALM NC NC NC NC 4.17 10.16 4.17 10.16 0.6 0.6 8 max 8 max PCB PCB Terminal Terminal 2.54 0.2 2.54 0.2 Dimensions in mm Dimensions in mm Tolerance : 0.5 Tolerance : 0.5 Weight : 20g Weight : 20g 0-0-10 10 1.3 0.3 1.3 0.3 39.9 0.6 39.9 0.6 Coplanarity within 0.1 Coplanarity within 0.1 11-Nov-05 |
Price & Availability of SWX1048S2V0
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |